Offset Snaps Removal Tool

Maker	Multiboard
Download	https://thangs.com/designer/Multiboard/3d-model/Offset%20Snaps%20Removal%20Tool-993368
Description	An extraction tool for snaps with a mechanism like an old fashioned hypodermic grip.

Notes

• If I can’t pull a snap out from a tile using my finger (so about 50-60% of the time), I use this tool. It sometimes takes a few goes to really lock it in, and I find the hooking motion a little counter intuitive for some reason, but that’s me, not the tool. Sometimes it just can’t get the required grip, and I’ll switch to the OctaPuller, but the trick tends to be to be a little more patient, give it a wiggle to ensure the hooks are well seated and only then pull the plunger/sides up.
• Took a bit of effort to assemble as the palm handle was very tight, but a bit of brute force bracing against the floor worked and it has been solid since.
• Does not work with older style Dual Snap Snaps.

Use 5 perimeter wall thickness, 0.2 mm layer height, and 15% infill.