Xiegu G90 Stand - 7 Side Fins

Maker	Aoxhwjfoavdlhsvfpzha
Download	https://www.printables.com/model/926958-xiegu-g90-stand-7-side-fins
Description	A clip on stand for the Xiegu G90 transceiver.

Notes

• I had printed another stand for my Xiegu G90, but it was not until I found this one that I realised why the previous one did not work - the original model was designed to clip to a unit with five side fins and mine had seven. This model catered for that and fits much better.
• I printed it in PETG to give it a bit more resilience and flexibility than using PLA.
• I printed it in black to match the transceiver.
• I added some rubber feet to stop it sliding about on a smooth surface like my desk.
  • I actually used ones with tapered sides to give better distribution of the pressure, but pill-shaped or larger dome-shaped ones should work similarly well. Small ones are not going to cut it though. Ideally they should fill the width, but if necessary align them to one edge.
• Viewing angle seems to be okay.
• Not perfect as the back is supported by the rear rack guards and they skid on a smooth surface. I think I’ll need to employ some cheap non-slip rubber matting - which could also be useful if you don’t have rubber feet to attach to the stand.